A broken windowpane doesn’t just mean that the temperature control in your home shows a higher energy usage bill at the end of the month. It’s also a sign that you need to seek out how to replace a broken window pane to prevent burglars and trespassers from getting into your home.
Knowing how to replace a broken windowpane or get it replaced is going to save you time and energy. Here’s how to replace a broken window safely no matter the window style.
How to Spot a Broken Windowpane
Check for cracks in the glass. If you see any, that’s a good indicator that the pane is damaged. Another sign is if the glass is sagging or drooping in any way.
This usually happens when the frame around the pane is loose or damaged. Finally, if you can see daylight around the edges of the pane, that’s a sure sign that it needs to be replaced.
How to Safely Remove a Broken Windowpane
If the glass is still in one piece, you’ll need to score it first. Use a glass cutter or utility knife to make a continuous line across the glass. Make sure to only score the glass and not the frame. Once you’ve scored the glass, you can use a putty knife or screwdriver to gently pry out the broken piece.
If the glass is shattered, you’ll need to use a vacuum cleaner with the hose attachment to suck up as much of the glass as possible. You can also use a brush to sweep up any remaining shards. Once the glass is removed, you can clean up the area and replace the broken window pane.
How to Install a Replacement Windowpane
Instructions for installation may vary depending on the window, but some tips on installation are common. Clear the area around the window. You will need to access the inside and outside of the window.
Remove the old windowpane. You will need to unscrew or pry off the molding that is holding the glass in place. Take measurements of the opening. You will need these measurements to purchase a replacement windowpane.
Purchase a replacement windowpane that is the same size as the opening. Install the new windowpane. You will need to put the molding back in place to hold the new glass in place.
Installing Safety Window Films in Windowpane
Homeowners who are looking for an extra layer of security for their homes can install safety window films on their windowpanes. This film is designed to hold glass together in the event of a break-in or severe weather, helping to deter would-be intruders and keep your family safe.
While the installation process is relatively straightforward, it’s important to follow the manufacturer’s instructions carefully to ensure the film is applied correctly. With a little care and attention, you can rest assured that your home is better protected against criminals and the elements.
Read More About How to Replace a Broken Window Pane
Replacing a broken window pane is a relatively easy and inexpensive home repair that anyone can do. By following the simple steps on how to replace a broken window pane, you can have your window looking good as new in no time.
So don’t delay, if you have a broken window, get it fixed today!
Did you find this article informative? If so, then be sure to check out the rest of our blog for more!